SeceuroVision 900
The SeceuroVision 900 security shutter is the shopfront specialist. Suitable for internal use on shopfronts, bars, kiosks and commercial applications where vision and security are both required.
- Description
- Specifications
- Accessories
SeceuroVision 9000 is an open grille constructed from a combination of extruded aluminium links and hinge sections with different slat spacing arrangements available The SeceuroVision 900 offers fantastic security whilst allowing window shoppers to clearly view items in window displays.
Curtain
SeceuroVision 900 is constructed from a combination of extruded aluminium links and hinge section. Link spacing is 150 mm in line as standard, however a brick bond pattern (no surcharge), 75 mm spacing (surcharge) and solid slat profile (surcharge) are also available.
Bottom Slat
Extruded aluminium with reinforcing angle and no seal
Shutter Box
Die cast aluminium end plates with two piece roll formed aluminium box. Larger sizes (shutters with a curtain weight of approx. 75 kg upwards) will be supplied with zinc plated steel end plates.
Guide Rails
Extruded aluminium with an integral box section for reinforcement and to facilitate fixing. High density 4 mm or 7 mm pile brush for quiet and smooth operation.
UPH140: 60mm wide x 27mm deep (205mm box only)
UPH240: 75mm wide x 27mm deep (250mm or 300mm box)
UPH250: recommended on wider shutters and for shutters requiring higher security 90mm wide x 34mm deep (250mm or 300mm box)
Finishing
External shutters require a silicone seal between the shutter and the wall along the top of the box and down the side of the guide rails.
Spring Loaded
A counterbalance spring in the axle ensures controlled raising and lowering. An espagnolette keylock or shootbolts lock into the guide rails and are usually incorporated in the bottom slat. Final adjustment of the springloading after installation is always required.
Switches
Supplied with a momentary switch which must be held until the shutter reaches the desired position.